MOCK • NCERT Class 7Medium

NCERT Class 7 Science Chapter 3 Electricity: Circuits and their Components Test

This free online test covers Chapter 3, Electricity: Circuits and their Components, from the NCERT Class 7 Curiosity textbook. The 28 questions are written directly from the chapter — definitions, processes, worked examples and the points the book italicises — so a score here tells you how much of the chapter actually stuck, not how well you guess. Each answer carries an explanation that says why the right option is right and why the other three fail, which is where most of the learning happens. Attempt it after your first read of the chapter, then again before the exam. There is no negative marking, and you can review the full solution the moment you submit.

Duration

28 mins

Questions

28 MCQs

Total Marks

28 pts

Negative

0 per wrong

Topics Covered in This Paper

Science
28 Qs100%

Sample Questions

Q1.At the hydroelectric power house that Nihal's class visited at the Bhakra Nangal Dam, electricity is generated using:
  • AThe energy of sunlight captured by panels
  • BThe force of falling water
  • CThe heat of burning coal
  • DThe push of wind on large blades
Q2.The chapter describes the electric cell as:
  • AA material through which current cannot pass
  • BA switch that completes or breaks a circuit
  • CA device that stores light and releases it later
  • DA portable source of electrical energy
Q3.On an electric cell, which part is the positive terminal?
  • AThe flat metal disc
  • BThe spring at one end of the cell holder
  • CThe small protruding metal cap
  • DThe plastic covering around the middle
Q4.What does the chapter call a combination of two or more electric cells?
  • AA battery
  • BA circuit
  • CA filament
  • DA conductor
Q5.When cells are placed in a torch so that the lamp glows, how are their terminals arranged?
  • AThe negative terminals of all the cells are joined together
  • BThe positive terminal of one cell is connected to the negative terminal of the next cell
  • CThe cells are placed so that no two terminals touch each other
  • DThe positive terminal of one cell is connected to the positive terminal of the next cell
Q6.What advantage does connecting more than one cell give to a circuit, according to the chapter?
  • AIt allows insulators to carry current
  • BIt removes the need for a switch in the circuit
  • CIt provides energy to the circuit for a longer time and, or, more energy
  • DIt makes the current flow from the negative terminal to the positive terminal
Q7.The Fascinating Facts box notes that the word battery is used loosely in everyday speech. In what way?
  • AIt is used even for a single cell, such as the one that powers a mobile phone
  • BIt is used only for cells that can be recharged
  • CIt is used for the switch inside a torchlight
  • DIt is used for the wires that connect a cell to a lamp
Q8.In an incandescent lamp, the thin wire fixed in the middle of the glass bulb is called the:
  • AFilament
  • BInsulator
  • CTerminal
  • DDiode
Q9.How is the filament of an incandescent lamp connected to the lamp's two terminals?
  • AIt is attached to a single thick wire that runs to the metal tip only
  • BIt is attached to two thick wires that touch each other inside the base
  • CIt is attached directly to the glass bulb, which acts as the terminal
  • DIt is attached to two thicker wires, one going to the metal case at the base and the other to the metal tip at the centre of the base
Q10.Why does an incandescent lamp produce light when current passes through it?
  • AIts metal case becomes charged and sparks
  • BIts filament gets hot and glows
  • CIts two terminals touch each other and flash
  • DIts glass bulb reflects the light of the room

Before you begin

6 quick notes

The test will auto-submit when the timer runs out.

Each correct answer carries +1 marks.

Each wrong answer carries -0 marks.

You can flag questions to review later.

Do not switch tabs during the test.

Your progress is auto-saved.

Disclaimer: The questions provided here are extracted and digitized from previous year papers using automated processes. They may contain typographical errors, formatting issues, or minor variations from the actual examination paper. While we have done our best to verify the accuracy of the official answer keys, discrepancies may occasionally exist. Please refer to the official commission website for the most authentic paper.

Timer starts immediately and keeps running even if you close the tab. Make sure you have 28 uninterrupted minutes.

FAQ

Frequently asked questions

Frequently Asked Questions

How many questions are in the NCERT Class 7 Science Chapter 3 Electricity: Circuits and their Components Test mock test?
This paper has 28 multiple-choice questions carrying 28 marks in total, to be attempted in 28 minutes.
Is the NCERT Class 7 Science Chapter 3 Electricity: Circuits and their Components Test mock test free to attempt?
Your first test on AI Test Planet is free, whichever paper it is. After that each paper uses one test credit — ₹9 a test, ₹5 for the first one you buy. You see your score and the correct answers immediately after submitting.
Does this paper have negative marking?
No, there is no negative marking on this paper, so an attempted guess costs you nothing.
Are solutions and explanations available?
Yes. After you submit, every question shows the correct answer with a step-by-step explanation, along with a topic-wise breakdown of your performance.