NCERT Class 11 Physics Chapter 1 Mechanical Properties of Solids Test
This free online test covers Chapter 1, Mechanical Properties of Solids, from the NCERT Class 11 Physics Part II textbook. The 28 questions are written directly from the chapter — definitions, processes, worked examples and the points the book italicises — so a score here tells you how much of the chapter actually stuck, not how well you guess. Each answer carries an explanation that says why the right option is right and why the other three fail, which is where most of the learning happens. Attempt it after your first read of the chapter, then again before the exam. There is no negative marking, and you can review the full solution the moment you submit.
Duration
28 mins
Questions
28 MCQs
Total Marks
28 pts
Negative
0 per wrong
Topics Covered in This Paper
Sample Questions
- ACompressibility
- BRigidity
- CPlasticity
- DElasticity
- ASteel and brass
- BPutty and mud
- CRubber and the elastic tissue of the aorta
- DGlass and concrete
- AThe modulus of elasticity, which has no unit
- BStress, whose SI unit is N m^-2 or pascal
- CThe elastic limit, whose SI unit is newton
- DStrain, whose SI unit is N m^-2 or pascal
- A[M L T^-2]
- B[M L^-3 T^0]
- C[M L^2 T^-2]
- D[M L^-1 T^-2]
- ABecause it is the ratio of a change in a dimension to the original dimension, so the units cancel
- BBecause it is always a very small number close to zero
- CBecause it is defined as force divided by area, and both are measured alike
- DBecause it is measured as a percentage and percentages have no units
- AThe angle is usually very small, and even at 10 degrees there is only a 1 per cent difference between the angle and its tangent
- BThe tangent of an angle is equal to the angle for all angles up to 90 degrees
- CThe relative displacement is always equal to the length of the cylinder
- DShearing strain is measured in degrees, so the tangent may be dropped
- AAn elongation of the body along the direction of greatest pressure
- BA decrease in volume with no change in the geometrical shape of the body
- CA change of shape with no change in the volume of the body
- DA relative displacement between opposite faces of the body
- AStress is inversely proportional to strain for all deformations
- BStrain is proportional to the square of the applied stress for small deformations
- CFor small deformations, stress is directly proportional to strain, the constant of proportionality being the modulus of elasticity
- DStress is proportional to strain only for deformations beyond the yield point
- AThe fracture point, at which the material breaks into pieces
- BThe end of the linear region, since Hooke's law and elastic behaviour end together
- CThe ultimate tensile strength, beyond which the material has a permanent set
- DThe yield point, also called the elastic limit, and the stress there is the yield strength
- AIts ultimate tensile strength and fracture points are close together
- BIts ultimate tensile strength and fracture points are far apart on the stress-strain curve
- CIts linear region OA is longer than its region AB
- DIt regains its original length after being stretched several times over
Before you begin
The test will auto-submit when the timer runs out.
Each correct answer carries +1 marks.
Each wrong answer carries -0 marks.
You can flag questions to review later.
Do not switch tabs during the test.
Your progress is auto-saved.
Disclaimer: The questions provided here are extracted and digitized from previous year papers using automated processes. They may contain typographical errors, formatting issues, or minor variations from the actual examination paper. While we have done our best to verify the accuracy of the official answer keys, discrepancies may occasionally exist. Please refer to the official commission website for the most authentic paper.
Timer starts immediately and keeps running even if you close the tab. Make sure you have 28 uninterrupted minutes.
FAQ
Frequently asked questions
Frequently Asked Questions
- How many questions are in the NCERT Class 11 Physics Chapter 1 Mechanical Properties of Solids Test mock test?
- This paper has 28 multiple-choice questions carrying 28 marks in total, to be attempted in 28 minutes.
- Is the NCERT Class 11 Physics Chapter 1 Mechanical Properties of Solids Test mock test free to attempt?
- Your first test on AI Test Planet is free, whichever paper it is. After that each paper uses one test credit — ₹9 a test, ₹5 for the first one you buy. You see your score and the correct answers immediately after submitting.
- Does this paper have negative marking?
- No, there is no negative marking on this paper, so an attempted guess costs you nothing.
- Are solutions and explanations available?
- Yes. After you submit, every question shows the correct answer with a step-by-step explanation, along with a topic-wise breakdown of your performance.